The lovely ladies at Ministry of Craft are going to be guest blogging for us, sharing some nifty tutorials, handy hints and tips and of course introductions to the wonderful courses that they run here at Freds. For their first blog post, Lindsey Vigurs has created a tutorial on how to made DIY Save-the-Date cards. Thanks Lindsey!
“It’s summer and we’re fully embracing wedding season here at Ministry of Craft. We party with hens most weekends at our studios (downstairs in Fred Aldous), making fancy fascinators or sewing wedding bunting, and we love coming up with new ideas for wedding-friendly crafts. This week I share how to make your own Save-the-Date cards with a DIY stamp.
Cairn Eco Craft card (I used the Fred Aldous guillotine to cut it down into individual A5 sized postcards- talk to a staff member about this service)
Rico Neon ink pads (I used neon pink, black and white inks for my project)
Softcut Printing block (you’ll need the right size piece of lino for your chosen size of card, and I always have a spare piece of lino as I’m prone to mistakes!)
Roller (if you want to try some block printing ink as well as stamp pads, as I did)
Decide on your design
I chose simple SAVE THE DATE lettering with a heart motif and the date.
I used a biro to mark out my designs on the surface of the lino, so I could see where to cut. If you’re hand carving lettering and numbers then it’s important to remember to carve them back to front. The print that you take from your stamp will be a mirror image of your block. I have fallen foul of this so many times and it is VERY frustrating!
It’s also worth noting that the lino cutting tools are very sharp and it’s easy to slip. Set yourself up so that you are cutting at a comfortable height on an even surface, and ALWAYS cut away from the hand or fingers that are steadying the lino. And even then, probably best to have some plasters at the ready. This is crafting at its dangerous best!
Inking and printing
When you have your prints carved and ready you can crack open the stamp pads. Press the stamp onto the pad a number of times until you can see that the surface of your print is evenly covered with ink. Then place your stamp face up on a cutting mat, or clean flat surface, and carefully place your card over the top in the required position. You don’t want to smear the ink on the card at this point, so take your time. I used a spoon to ‘hand burnish’ over the top of the print with even pressure in small circular movements. Do this all over the print block (to take a nice even print) and then peel the card off and stand back to bask in your own awesomeness. If the print isn’t that awesome then ink up again and take another print. Sometimes the ink needs to build up a bit on the surface of the stamp before it’ll take a decent opaque print.
If you want to use ink from a tube, you’ll need a flat surface that you can roll ink out on with a roller. I used a Perspex sheet. When the ink is rolled out and is making a gentle hissing noise (rather than a sticky crackle) then you can use the roller to transfer the ink from the sheet onto the printing block.Roll in all directions to build up a good layer of ink. Then take your print as before, using the spoon to apply even pressure though the back of the card.
If you’d rather stamp your prints (and not bother with all this weird spooning) then you’d be better off using these very nice stamp blocks from Yellow Owl Workshop. They are more expensive but it will probably save you a bit of time. I went for the budget option: I’d rather spend the saved pennies on extra booze for the wedding.
Patience is a virtue
I printed all the ‘SAVE the DATE’ lettering first with white ink. And waited for those to dry while I carved the heart. I then printed the hearts in neon pink. I then waited for those to dry while I carved the date stamp. I then overprinted the hearts with the date stamp. If I hadn’t waited for the hearts to dry it would have resulted in a mucky mess. So patience is a virtue here, but the inks are pretty quick drying so it’s not a big deal. Just fix yourself a cuppa, or have a gin if it’s past noon.
I’m really pleased with my DIY card. It’s personal, fun and completely bespoke. Plus I saved £££ which I can splurge on extra wedding fizz. Or a DJ. Or a vintage photo-booth. Or karaoke!
We’ll be blogging many more tutorials over the summer, so stay tuned. And if you’d like to hold your party with Ministry of Craft, hen or otherwise, then check out our party page here. Lastly, if you’d like to learn how to make lino prints (or screen prints) with the help of our lovely expert tutor, Nell Smith, then sign up here for one of our next courses happening on Saturday 13 September.”