Details
All purpose Silicone rubber for mould making, 1kg pack (includes catalyst). Can be coloured using Winton Oil Paint. Ideal for body casts from alginate. Instructions: 1. Stir silicone well before use. 2. Shake catalyst before use. 3. The mix ratio is 100 parts silicone to 4 parts catalyst by weight. 4. Weigh the correct amount silicone into a clean container, weigh the correct amount of catalyst and mix evenly. If you have a problem with air bubbles in the mix, mix carefu
lly and not too quickly. TIP: Try pouring the silicone into a strong poly bag, add the catalyst, squeeze out the excess air and seal off with tape, then mix in the bag. Allow the rubber to cure for 8 hours before removing from the pattern. For best results allow the mould to air cure for an additional 24 hours before using in production. Silicone moulds can be used to bake polymer clay, while still in the mould. For use with food treat in oven 120c - 130c for 6 to 7 hours.
Additional Information
| SKU | 151160008 |
|---|
Related Products
-
Gedeo Siligum 300g
Availability: 11 In stock
£25.99 -
Heat Resistant Silicone Rubber 250g
Availability: 4 In stock
£28.60 -
Gedeo Siligum 100g
Availability: 6 In stock
£12.50
-
Review by LakishaNew all time favourite
- very easy to use and doesn't smell too bad, I've had briliant results everytime!Read More (Posted on 25/05/2012)
-
Review by CharlotteGreat Product would use again
- Great for detailed mould casting, hard wearingRead More (Posted on 27/03/2012)
-
Review by scottGood Silicone Rubber
- Good product, easy to use. I got very few air bubbles without using the bag method. Oil colours made it easy to tint different layers.Read More (Posted on 13/01/2012)
-
Review by PaulGreat all rounder
- Really great results from this. You can even colour it with Oil Colour. Picks up all the detail and if you use the sealed bag mixing method you get nearly 0 air bubbles.Read More (Posted on 29/10/2011)
Ask a question
4 Item(s)
per page
A. For use with food treat in oven 120c - 130c for 6 to 7 hours.
Q. Approximately how much would I require to cast one average size human hand?
Asked by Samantha - 07/03/2012
A. One bag will be plenty, and you will have some left over as well.
Q. Can this be used for 2 part resin moulds?
Asked by Kisha - 12/01/2012
A. Yes it can be used for 2 part resin moulds.
Q. can i use this to make moulds to cast resin parts in for small run batches, or do you recommend something else.
Asked by andy - 26/10/2011
A. Yes this will be fine for resin casting.
Earn 1 Monkey Point for each approved tag you make.
Related Products
Compare Products
You have no items to compare.
Asked by Nick - 25/02/2013